Lemon Lush (30ml)

Propylene Glycol, Natural and artificial flavourings and sweeteners.

30ml of concentrated flavouring suspended in Propylene Glycol.

The liquid in this bottle does not contain any nicotine.

Suitable for sub-ohm, MTL tanks and pods once pre-mixed with VG/PG.

Manufactured in an IOS 7 laboratory with full batch traceability.

Aluminium screw cap with heat shrink seal cover.

Glass 'Boston' bottle (Matte Black) with aluminium screw cap.

GET YOUR INGREDIENTS AND EQUIPMENT READY

Before you start mixing make sure that you have everything ready, below are some of the general tools used for any DIY mixing.

A - Empty Bottle

B - 30ml Concentrate

C - Digital Scales

D - Vegetable Glycerine (VG) Propylene Glycol (PG) or Base Mix

E - Syringe or Pipette

F - Latex/Protective Gloves

G - 'Easy Mix' Card

H - 10ml Nicotine Shot

STEP (1) - Illustration 1

Carefully remove the cap of your bottle of concentrate and withdraw the liquid via a syringe or pipette, this does not have to go in first but if using our ‘Easy Mix’ card it will need to go in the empty bottle first. If you want to match to our flavours currently in store then you will need to use 20% of flavouring but you can add as much or as little as you want.

STEP (2) - Illustration 2 & 3

Measure your base Ingredients by measuring the Propylene Glycol (PG) and Vegetable Glycerine (VG) portions according to your planned ratio via a digital scale (Recommended) or by using our ‘Easy Mix’ card following our guidelines. To save time you can also purchase a pre-mixed PG/VG ratio, this is called a ‘Base Mix’ and is a combination of both PG and VG that has already been mixed to a set ratio so all you have to do is add the amounts of PG/VG together and fill your bottle with that amount of base mix.  

STEP (3)

Add your nicotine (If required) and don't forget to handle nicotine with extreme care and avoid skin contact and spills, it is advised to use gloves for this if unsure how to handle nicotine and we do supply these separately. 

For 60ml bottles (3mg strength nicotine approx) this bottle uses 1 x 10ml bottle.

For 120ml bottles (3mg strength nicotine approx) this bottle uses 2 x 10ml bottles. 

For higher strength nicotine levels you will need to look online for more in-depth guides.  

STEP (4)

Combine the nicotine with the concentrate and PG/VG and mix thoroughly and don't forget to close the bottle tightly. Next shake the mixture vigorously to ensure all components are blended, some mixers use additional techniques like warm baths or stirring devices but simple shaking is the core method. Next you need to give your new e-liquid a good steep, some flavours improve with time such as ‘Bakery’ and ‘Creams/Custard’ flavours. 

STEP (5)

After mixing store the bottle in a cool, dark place and allow it to “steep” for the recommended period for your flavour type and shake the bottle periodically to help with the blending. Once steeping is complete test a small amount in your device and note the flavours smoothness and intensity and make adjustments If the flavour is too weak, too strong, etc. You can adjust the recipe in small increments by adding more concentrate but remember you cannot take out so be careful when mixing and always follow recommended guidelines.

STEP (6)

Shake again after each adjustment, clearly label the bottle with the flavour name, nicotine strength, /PG/VG ratio and date mixed via one of our labels or use your own. Store in a cool, dark place out of reach of children and pets when not in use and that's it, you have made a bottle of e-liquid!

Keep out of reach from children and pets. Harmful if swallowed. Not to be sold to persons under 18. The liquid in this product is nicotine free but can be used with nicotine. Nicotine can be harmful when in contact with skin. This product may contain sensitisers such as sweeteners which may adversely affect some consumers. Keep out of direct sunlight and store in a dark/cool place.